| 1, 3: LEVEL: These rotary potentiometers control the level or gain of each channel, with the fully-clockwise position of each providing maximum sensitivity. |
| 2, 4: PRESENCE: These rotary potentiometers add emphasis to the upper frequencies, giving increased "presence" to the output. |
| 5: POWER SWITCH: This switch turns the amplifier on and off. When AC power is applied to the amplifier the switch will light up. |
| 6: FUSE HOLDER: The amplifier is protected from damages caused by a faulty AC power source or other problems. If the fuse blows, replace it ONLY with the same size and type as indicated. If the fuse blows repeatedly, check the AC source: if it’s okay, contact your Crate dealer for service information. |
| 7: AC LINE IN: This heavy duty power cord must be connected to a properly grounded AC outlet of the proper voltage for the amplifier to operate. IN ORDER TO AVOID THE POSSIBLIITY OF ELECTRIC SHOCK, DO NOT REMOVE OR BYPASS THE GROUND PRONG OF THE POWER CORD! |
| 8: SPEAKER OUTPUT JACKS: Use these jacks to connect the amplifier to your speakers when using the amplifier in the stereo or slave mode. The minimumload for these jacks is 4 ohms (total). NOTE: These jacks are NOT used in Mono Bridge mode! |
| 9: MONO BRIDGE OUTPUT: Use this jack to connect the amplifier to your speakers when using the amplifier in the Mono Bridge mode. The minimum load for this jack is 8 ohms (total). NOTE: This jack is NOT used in Stereo or Slave mode! |
| 10: MONO BRIDGE/STEREO SWITCH: This switch selects the operating mode of the amplifier. In the "out" position the amplifier is in the Stereo Mode; with the switch in the "in" position the amplifier is in the Mono Mode. In the Mono Mode, Channel 1 functions as the input channel; Channel 2 input and Level control will be disconnected. |
| 12,13: INPUT JACKS: These jacks accept unbalanced line level signal sources by means of cables fitted with standard 1/4" phone plugs. |
| 14,15: PARALLEL OUTPUT JACKS: These jacks allow connection to additional power amplifiers, slave operation of both channels, etc., by providing a parallel connection to the input jacks. (This applied to both modes of operation – Stereo and Mono Bridge. In the Mono Bridge mode, only the Channel 1 Output jack will carry a signal.) |
Experience the ultimate in Vaping with iget Bar flavours that Offer a Refreshing and invigorating sensation. Each puff delivers a burst of delicious taste, making your Vaping Experience truly enjoyable. Whether You prefer fruity, minty, or dessert-inspired flavours, the diverse range of iget vape flavours ensures there’s something for everyone. Elevate your Vaping journey and indulge in the rich, satisfying profiles that iget has to Offer.